Elma Elmasonic S 180 H User Manual

Elma Schmidbauer GmbH Gottlieb-Daimler-Str. 17 D-78224 Singen Fon +49 (0)7731 / 882-0 Fax +49 (0)7731 / 882-266 info@elma-
ultrasonic.com
www.elma-ultrasonic.com
Service Manual
Elmasonic S
Ultrasonic Cleaning Units

English


Elma Elmasonic S 180 H Specifications

General

Ultrasonic Frequency	37 kHz
Material	Stainless Steel
Timer	Yes
Heating	Yes
Timer Range	1-30 minutes
Temperature Range	30-80°C

Summary

General Information and Usage

Required Testing Equipment and Tools

Required tools and equipment for testing and repair.

Important Safety Warnings

Product Description and Specifications

Technical Details and Specifications

Technical specifications for various Elmasonic S models.

Operating and Display Functions

Description of unit operations and display indicators.

Troubleshooting Guide

Measuring Points on PCBs

Identification of measurement points on PCBs for troubleshooting.

How to Open the Unit

Opening Elmasonic S10 – S15H

Procedure for opening Elmasonic S10 and S15H units.

Opening Elmasonic S30, S40, S70, S80(H)

Opening Elmasonic S50R

Opening Elmasonic S60, S100 – S900H

Closing the Unit / Mounting Bottom Plate

Replacing Turning Knobs

How to Remove Turning Knobs

How to Mount Turning Knobs

Replacing the PCB Control

PCB Control Replacement: S10(H)–S300(H)

Replacing the PCB control on Elmasonic S10-S300(H) units.

PCB Control Replacement: S350R-S900H

Replacing the PCB control on Elmasonic S350R, S450H, S500HM, S900H.

Power Module Replacement: S350R-S900H

Replacing the PCB Interference Filter

Interference Filter: Elmasonic S10(H)–S40(H)

Replacing the PCB interference filter on Elmasonic S10-S40(H) units.

Interference Filter: Elmasonic S60(H)–S100(H)

Replacing the PCB interference filter on Elmasonic S60-S100(H) units.

Interference Filter: Elmasonic S120(H)–S300(H)

Replacing the PCB interference filter on Elmasonic S120-S300(H) units.

Interference Filter: Elmasonic S350R-S900H

Replacing the PCB interference filter on Elmasonic S350R, S450H, S500HM, S900H.

Replacing Potentiometers

Replacing the Heating Element

Heating Wiring: S450H and S900H

Transducer Tank Replacement

Drain Duct Replacement

Replacing the Turning Knob Drain Duct

Replacing the Ball Valve

Putting into Operation and Trial Run

Filling the Unit with Cleaning Liquid

Cleaning Media Guidelines

Setting Temperature via Turning Knob

Checking Ultrasound Functionality