Need help?Do you have a question about the Elma Elmasonic S 300 H and is the answer not in the manual?
General| Ultrasonic Frequency | 37 kHz |
|---|---|
| Heating | Yes |
| Material Tank | Stainless Steel |
| Material Housing | Stainless Steel |
| Drain | Yes |
| Timer | 1-30 minutes |
| Operating Mode | Sweep, Degas, Normal |
Specifies the designated purpose and application of the ultrasonic cleaning unit.
Defines the qualifications required for personnel performing repairs.
Crucial safety measures to prevent electric shock during operation and maintenance.
Description of how to use the unit's functions and interpret its displays.
Common malfunctions resulting from incorrect operation or unsuitable cleaning media.
Steps for diagnosing and checking a malfunctioning ultrasonic cleaning unit.
Interpreting flashing LED indicators to identify specific faults in the unit.
Locations for voltage measurements on the PCB interference filter for diagnostics.
Step-by-step guide for replacing the main control PCB in these models.
Procedure for replacing the interference filter on these specific models.
Instructions for replacing the PCB interference filter in S60/S100 models.
Guide to replacing the interference filter for S120 to S300 models.
Procedure for interference filter replacement in high-capacity models.
Step-by-step instructions for replacing the PTC heating element.
Procedures for replacing the transducer tank due to damage or leaks.
To Next Page