Elma Modulgrav - Proper Care; Maintenance and Service

Quality from Tradition; Technology of Tomorrow
mbC:\DB-pdf\BedAnl\Modulgrav\-GB-300102.doc 22
7. Proper Care
- The device is composed of high-quality material and components.
- Avoid dirt accumulation on the engraving device by cleaning it regularly, or its
functioning may be impaired.
- Do not use any scratching or scraping tools for cleaning the device.
8. Maintenance / Service
Note:
- The fixing screws of the table top may not be loosened since the table top is specifically
set for this device, loosening the screws will impair the engraving result.
- No changes may be made to the settings of the linear guides.
- Performing changes to the linear guides will void your guarantee or warranty claim.
- If you require help from our technical support office, contact our service department in
writing specifying the defect or problem in detail.