Elma Modulgrav - Page 6

Quality from Tradition; Technology of Tomorrow
mbC:\DB-pdf\BedAnl\Modulgrav\-GB-300102.doc 6
Clamping Possibilities
Clamping device, short:
Clamping range “round“ up to ∅15mm; ∅22mm;
∅30mm
Clamping range “cylindric“ starting from ∅6mm
Clamping range “flat“ starting from parts 5mm -
40mm wide
Clamping device, long:
Clamping range “flat“ up to 180mm
Clamping range “cylindric“ starting from ∅3.6mm
Groove plate:
Dimensions 250mm x 150mm x 15mm
Universal device:
Plates up to ∅150mm
Cups ∅80mm
Type factors:
Template model (height) Type adjustment Factor V
20 mm 0.8 25
20 mm 1.7 11.7
20 mm 2.7 7.4
20 mm 3.6 5.5
20 mm 4.6 4.3
20 mm 5.5 3.6
20 mm 6.5 3.0
12 mm 0.5 24
12 mm 1.0 12
12 mm 1.6 7.5
12 mm 2.2 5.4
12 mm 2.7 4.4
12 mm 3.3 3.6
12 mm 3.9 3.0
Type expansion factors:
Template model (height) Type adjustment Factor V
20 mm 7.5 mm 1.5 : 1
20 mm 0.8 mm 2.4 : 1
12 mm 4.9 mm 1.5 : 1
12 mm 1 mm 2.4 : 1