Elmo Rietschle V-VCS 300 User Manual

V
V Serie
V Series
Drehschieber
Rotary Vane
Edition: 1.0 · 1.7.2020 · BA 236-EN
Operating Instructions
V-VCS 200 | 300 and V-VCX 200 | 300
Vacuum pump
Translation of the original Operating Instructions
Keep in a safe place for future reference!

Elmo Rietschle V-VCS 300 Specifications

General

Brand	Elmo Rietschle
Model	V-VCS 300
Category	Water Pump
Language	English

Summary

2 Safety

2.1 Labelling of warnings

Explains the different warning levels and their consequences.

2.2 General

2.3 Intended use

Describes the specific applications and operating conditions for the vacuum pump.

2.4 Inadmissible operating modes

2.5 Personnel qualification and training

2.6 Safety-conscious working

2.7 Safety instructions for the user

2.8 Safety instructions for installation, commissioning and maintenance

2.9 Hazardous substances

2.9.1 Conveying media

Information on handling hazardous media conveyed by the pump.

2.9.2 Auxiliary materials and lubricant

2.10 Safety equipment, monitored functions

2.11 Emergency Stop / Emergency Off

2.12 Environmental protection

4.2 Data plate

4.4 Fields of application

5 Installation

5.1 Preparation of installation

Steps and conditions required before installing the pump.

5.2 Installation

Instructions for the physical installation of the vacuum pump.

5.3 Connection of pipes

5.4 Check lubricating oil

5.5 Connection of motor

6 Commissioning and decommissioning

6.1 Start-up

Steps for safely starting up the vacuum pump for the first time.

6.1.1 Installation check

6.1.2 Check the rotation direction

6.2 Decommissioning/ storing

6.2.1 Decommissioning of the machine

6.3 Recommissioning

7 Maintenance and repair

7.1 Ensure operational safety

Emphasizes regular maintenance for safe operation.

7.2 Maintenance tasks

7.2.1 Air filtering

7.2.3 Change the oil

7.2.4 Oil removal

7.3 Repair / service

7.4 Spare parts

8 Malfunctions: Causes and elimination

Machine is switched off by the motor protection switch

Pumping capacity is insufficient

Final pressure (max. vacuum) is not reached

Machine gets too hot

Exhaust air contains visible oil mist

Water in lubricating oil

9 Disassembly and disposal

9.1 Disassembly

9.2 Disposal