EasyManua.ls Logo

ELNA 6200 - Page 28

ELNA 6200
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Close zipper. Turn zipper face up (right seam allowance
forms a small fold at basting line) and smooth zipper
teeth away from seam. Attach foot with right side pin.
Reset straight stitch length to 2.4. Starting at the bottom,
sew through the folded seam allowance and zipper tape.
Stop just before the zipper foot reaches the slider on the
zipper tape. Lower the needle slightly into the fabric.
Raise the zipper foot and open the zipper. Lower the foot
and stitch the remainder of the seam.
Close the zipper and spread the fabric flat with the right
side facing up. Baste through the opened seam
allowance and zipper tape.
Move the zipper foot to the left side pin. Guide the edge
of foot along the zipper teeth and stitch through the
garment and zipper tape. Stop about 5 cm (2˝) from the
top of the zipper. Slightly lower the needle into the fabric.
Raise the foot, remove the basting stitches from seam
line and open the zipper.
Lower the foot and stitch the remainder of the seam,
making sure the fold is even.
Remove remaining basting stitches.

Table of Contents

Other manuals for ELNA 6200

Related product manuals