User Manual – 2201L
SW601363 Rev E, Page 10 of 23
Chapter 4 – Operation
Power
To turn the touchmonitor on or off, press the touchmonitor power button once.
The Power Status LED on the bottom of the touchmonitor functions according to the following
table:
OFF OFF
SLEEP PULSING
ON ON
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to technical specifications on the Elo website
http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the
mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable
from the power adapter when long periods of disuse are planned.
Touch
Your IntelliTouch Plus touchmonitor is factory-calibrated and should not need manual calibration
(unless the input video is not fully scaled to the native resolution, or the touch experience needs
to be calibrated to a specific user).
To Next Page
Loading...
Need help?
General