User Manual – 2201L
SW601363 Rev E, Page 15 of 23
settings will not default to the factory specifications.
OSD and Power Lockouts
Press and hold the “Menu” and “Down” buttons for two seconds to enable/disable the OSD
Locking feature. When the OSD Locking is enabled, pressing any of the Menu, Up, Down, or
Select keys will have no effect on the system.
Press and hold the “Menu” and “Up” buttons for two seconds to enable/disable the Power
Locking feature. When the Power Locking is enabled, pressing the power switch will have no
effect on the system.
Audio
When headphones are plugged into the headphone output jack, the internal speakers turn off
and audio is played over the headphones.
Volume and muting of the speaker and headphone outputs can be controlled by the OSD.
To Next Page
Loading...
Need help?
General