Elo TouchSystems ESY15i1 - Page 25

User Manual: i-Series Interactive Signage
SW602242 Rev C, Page 25 of 35
 onBCR_StateChange
 Refer to Table 3-2
 Notify the application about the BCR status change data
 onGPIO_StateChange
 Refer to Table 3-2
 Notify the application about the GPIOs status change data
BCR state value
ELOPeripheralManager.BCR_STATE_DEVICE_CONNECTION 1 << 0
ELOPeripheralManager.BCR_STATE_DEVICE_DISCONNECTION 1 << 1
ELOPeripheralManager.BCR_STATE_DATA_RECEIVIED 1 << 2
ELOPeripheralManager.BCR_STATE_PIN_AUTO_DISABLE 1 << 3
GPIO state value
ELOPeripheralManager.GPIO_STATE_HIGH 1 << 4
ELOPeripheralManager.GPIO_STATE_LOW 1 << 5
GPIO data
gpio81
gpio82
Table 3-2