Pipe Adjustment Before Spraying
1)
ASSEMBLING THE CONTAINER
I Remove the
container
by
unscrewing
ii
in clockwise direction from the spray gun.
2
Fill the
container
with
paint
of
the correct viscosity.
'3 Adjust
the
suction pipe direction correctly according to different operating condition
to
deplete
the
material
in
the
container
as
much as possible.
2)
SPRAYING WITH A TILTING ANGLE:
Before
spraying,
evaluate
the
direction
you
are
about
to
spray
to
adjust
the direction
of
the tube.
Note
:
Don't
tilt
too
much!
Spray to the underlying objects
Turn the suction pipe forwards. (SEE FIG. H1)
Spray
to
the overhead objects
Turn
the
suction pipe backwards. (SEE FIG. H2)
H2
How to operate the trigger:
1)
START THE SPRAYING WORD (SEE FIG.
I)
.
To s
tart
the
tool,
depress
and
hold
the
trigger
switch
(t
he
on/off
switch)
.
2)
STOP THE SPRAYING WORK(SEE FIG.
J)
To
stop
the
tool
, rele
as
e
the
trigger
switch (the
on
/off switch)
,----------
---,
J
13
To Next Page
Loading...