Fast
Cleaning
(SEE FIG. P ):
1) Disassemble the paint sprayer body. Remove the container.
2) Install the cleaning connector according to the usage of the cleani
ng
connector.
3) Wash the residual water-soluble paint inside the sprayer
p
Cleaning Instructions:
One end of the water pipe is connected to the faucet, and the other end is connected to
the
cleaning conne
ct
or
. Open t
he
faucet to flush the internal channels
of
the gun body.
(Note: wa
ter
pipes
ar
e not included)
l
18
To Next Page
Loading...