About these Instructions 2
ledge of the relevant standards and regulations, to carry out work in
electrical systems, and to recognize and avoid possible hazards
independently. A qualified electrician receives training for the
specific location in which he or she works, and is acquainted with
the relevant standards and regulations.
2.2 The enCore FC1 Manual at a Glance
The FC1 manual is made up of four parts in all:
• “Use in Legal Metrology”
This volume focuses on the legally relevant properties and
functions of the FC1 flow computer.
• “Operating Instructions”
This volume describes the assembly, installation, commissioning
and maintenance of the FC1.
• “Configuration of Device Software”
This volume describes parameterizing devices of the enCore series
with the software system enSuite, the software download and
further services.
• “Basic System with SFBs”
This volume describes the basic system, which provides all basic
functions of the device software. The basic system e.g. manages
the system resources, the I/O boards or the connection to other
devices via digital protocols.
• Functionality of individual Application Function Blocks
Each volume describes the parameterization, function and
operation of each AFB. These volumes always describe the full
range of functions of the respective AFBs.
2.3 Text Labelling
Texts containing different contents are labelled differently. With the help of
following characteristics, you can identify which content of the text is pro-
vided to you:
To Next Page
Loading...
Need help?
General