ELTEX ESR-1000 - Page 551

ESR series service routers.ESR-Series. User manual
551
Step Description Command Keys
13 Define a static ip address for the
specified OpenVPN server user.
esr(config-openvpn-user)# ip
address <ADDR>
<ADDR> – address set in the
following format:
AAA.BBB.CCC.DDD – IP address of
the subnet where AAA-DDD are set to
[0..255].
14 Enable OpenVPN server profile. esr(config-openvpn-server)#
enable
15 Enable data transmission blocking
between clients (optional).
esr(config-openvpn-server)#
client-isolation
16 Set the maximum amount of
simultaneous user sessions
(optional).
esr(config-openvpn-server)#
client-max <VALUE>
<VALUE> – maximum amount of
users, takes values of [1..65535].
17 The mechanism of transmitted data
compression between clients and
the OpenVPN server is enabled
(optional).
esr(config-openvpn-server)#
compression
18 Define the list of DNS servers that
will be used by remote users
(optional).
esr(config-openvpn-server)#
dns-server <ADDR>
<ADDR> – DNS server IP address,
defined as AAA.BBB.CCC.DDD where
each part takes values of [0..255].
19 Specify TCP/UDP port that will be
listened by OpenVPN server
(optional).
esr(config-openvpn-server)#
port <PORT>
<PORT> – TCP/UDP port, takes
values of [1..65535].
Default value: 1194.
20 Enable the default route advertising
for OpenVPN connections, which
leads to the replacement of the
default route on the client side
(optional).
esr(config-openvpn-server)#
redirect-gateway
21 Enable the advertising of specified
subnets, the gateway is OpenVPN
server IP address (optional).
esr(config-openvpn-server)#
route <ADDR/LEN>
<ADDR/LEN> – subnet address, set
in the following format:
AAA.BBB.CCC.DDD/EE – network IP
address with prefix mask, where
AAA-DDD take values of [0..255] and
EE takes values of [1..32].
22 Set time interval after which the
opposing party is considered to be
unavailable (optional).
esr(config-openvpn-server)#
timers holdtime <TIME>
<TIME> – time in seconds, takes
values of [1..65535].
Default value: 120.