ELTEX ESR-1511 - Page 518

ESR series service routers.ESR-Series. User manual
518
Step Description Command Keys
esr(config-if-gi)# ipv6 vrrp timers
advertise <TIME>
10 Set the interval after which
GratuituousARP messages are sent
when switching the router to the
Master status (optional).
esr(config-if-gi)# vrrp timers garp
delay <TIME>
<TIME> – time in seconds, takes
values of [1..60].
Default value: 5 seconds.
11 Set the amount of GratuituousARP
messages that will be sent when
switching the router to the Master
status (optional).
esr(config-if-gi)# vrrp timers garp
repeat <COUNT>
<COUNT> – amount of messages,
takes values of [1..60].
Default value: 5.
12 Set the interval after which
GratuituousARP messages will be
sent periodically while the router is
in the Master status (optional).
esr(config-if-gi)# vrrp timers garp
refresh <TIME>
<TIME> – time in seconds, takes
values of [1..65535].
Default value: Periodic sending is
disabled.
13 Set the amount of GratuituousARP
messages that will be sent with the
garprefresh period while the router
is in the Master status (optional).
esr(config-if-gi)# vrrp timers garp
refresh-repeat <COUNT>
<COUNT> – amount of messages,
takes values of [1..60].
Default value: 1.
14 Specify whether the higher priority
Backup router would try to take the
Master role from the current lower
priority Master router (optional).
esr(config-if-gi)# vrrp preemption
disable
esr(config-if-gi)# ipv6 vrrp
preemption disable
15 Set the time interval after which the
higher priority Backup route will try
to take the Master role from the
current lower priority Master router
(optional).
esr(config-if-gi)# vrrp preemption
delay <TIME>
<TIME> – timeout, takes value in
seconds [1..1000].
Default value: 0
esr(config-if-gi)# ipv6 vrrp
preemption delay <TIME>
16 Set the password for neighbour
authentication (optional).
esr(config-if-gi)# vrrp
authentication key ascii-text
{ <CLEAR-TEXT> | encrypted
<ENCRYPTED-TEXT> }
<CLEAR-TEXT> – password, set by
the string of 8 to 16 characters;
<ENCRYPTED-TEXT> – encrypted
password of 8 to 16 bytes (from
16 to 32 characters) in
hexadecimal format (0xYYYY ...)
or (YYYY ...).