ELTEX ESR-1511 - Page 603

ESR series service routers.ESR-Series. User manual
603
Step Description Command Keys
2 Specify the host name (optional).
For active mode, the name must match
the host name on the Zabbix server.
esr(config-zabbix)# hostname
<WORD>
esr(config-zabbix-proxy)#
hostname <WORD>
<WORD> – host name, set by the
string of up to 255 characters.
3 Specify the address of the Zabbix
server.
esr(config-zabbix)# server
<ADDR>
esr(config-zabbix-proxy)#
server<ADDR>
<ADDR> – server IP address,
defined as AAA.BBB.CCC.DDD
where each part takes values of
[0..255].
4 Specify the server address for active
checks (when using active mode).
esr(config-zabbix)# active-
server <ADDR> <PORT>
esr(config-zabbix-proxy)#
active-server <ADDR> <PORT>
<ADDR> – server IP address,
defined as AAA.BBB.CCC.DDD
where each part takes values of
[0..255].
<PORT> – server port, set in the
range of [1..65535].
Default value: 10051.
5 Specify the port that will be listened by
the agent/proxy (optional).
esr(config-zabbix)# port
<PORT>
esr(config-zabbix-proxy)# port
<PORT>
<PORT> – port that will be listened
by zabbix agent/proxy, may take
values in the range of [1..65535].
Default value: 10050.
6 Allow remote commands execution by
Zabbix agent/proxy (when using active
mode).
esr(config-zabbix)# remote-
commands
esr(config-zabbix-proxy)#
remote-commands
7 Specify the address from which the
server will interact (optional).
esr(config-zabbix)# source-
address <ADDR>
esr(config-zabbix-proxy)#
source-address<ADDR>
<ADDR> – server IP address,
defined as AAA.BBB.CCC.DDD
where each part takes values of
[0..255].
Default value: nearest routing
address.