Elu ETS41 - (Volt); (Min -1 ); Db(A); TÜV Rheinland Product and Safety Gmbh (TRPS) am Grauen Stein

ENGLISH
16 en - 1
SINGLE BEVEL TRAVERSE SAW BENCH ETS41
Congratulations!
You have chosen an Elu Power Tool. Years of experience, thorough
product development and innovation make Elu one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 3
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 3
Assembly and adjustment en - 4
Instructions for use en - 5
Maintenance en - 7
Guarantee en - 7
Technical data
ETS41
Voltage V 230
Motor power (input) W 1,000
Blade diameter mm 215 - 225
Blade arbor size mm 30
Max. blade thickness mm 2.6
Max. blade speed min
-1
2,950
Automatic blade brake time s < 10
Table size mm 644 x 514
Weight kg 28
Cutting capacities
Blade diameter mm 215 225
Depth of cut at 90° mm 47.5 52
Depth of cut at 45° mm 33.5 37
Max bevel angle ° -2 - 47 -2 - 47
Max. cross-cut capacity on traverse mm 47,5 x 260 52 x 270
Max traverse length on depth
of cross-cut 395 x 20 400 x 20
Standard equipment:
TCT blade, guard, combined rip/mitre fence, push stick
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
ETS41
Elu declares that these Power Tools have been designed in compliance
with: 98/37/EEC, 89/336/EEC, EN 61029, EN 55014-2, EN 55014,
EN 61000-3-2 & EN 61000-3-3.
For more information, please contact Elu at the address below or refer to
the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EEC,
measured according to EN 61029:
ETS41
L
pA
(sound pressure) dB(A)* 85.5
L
WA
(acoustic power) dB(A) 98.5
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Cert. No.
BM 2011163
Director Engineering and Product Development
Horst Großmann
Elu International, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany