13
5) When the required name (number) is displayed, press the
key to delete. A request is then displayed to confirm
deletion:
ROSSI MARIO
CANCEL???
PARAMETERS FOR PROGRAMMING
NB1: Given that each key has 3-4 letters, when pressed repea-
tedly the key enters the letters according to the number of times
the key is pressed (for example, if the key (6MNO) is pressed
once the display shows the first name with the letter M or next let-
ters if pressed consecutively. Therefore it is not possible to move
directly to the letter O or N as the display starts from M and then
the user can scroll the list with the relative keys.
NB2: Note that the forward scroll (by means of key ) is nor-
mally faster than the back scroll (by means of key ).
Therefore searches are recommended starting from the first let-
ters on the key.
Once the name to be called is selected, press key and
communication will proceed as per the number entry procedure
(see previous paragraph).
5) ENTERING/DELETING/MODIFYING USERS VIA THE KEY-
PAD:
This stored user management mode should only be used occa-
sionally (periodically on site). It should normally be avoided,
given the time-consuming procedure, and also because it does
not enable a trace to be maintained of stored data on file for
restoring data when required.
ENTERING A NAME VIA THE KEYPAD:
1) Press and hold keys + . This displays the message
“--------“ to request the password of previously memorised users
(default=222) after which press the key . The following data
are then requested:
New Number?
2)
A new internal number for entry is requested. Enter by means of
the numerical keys and press to confirm.
New Name? A
Entry of a new name is requested, proposing the first letter “A”.
To select the first required letter, press keys and as
required. When the required letter is displayed (such as M) press
the key to confirm and move to the next letter. The first
selected letter is shown on the display followed by A for the
second letter.
New Name? MA
DELETING A NAME VIA THE KEYPAD:
To delete a name, enter the user entry mode, scroll through to
the required name and delete. Proceed as follows:
1) Enter user programming mode by pressing keys +
simultaneously, to display the message “--------“ requesting
the user password previously memorised (default=222) and
then press key .
2) At this point the message is displayed (as described above)
requesting entry of the new number:
New Number?
3) Press the push-button to enter the name cancellation
mode.
4) Use keys and to scroll through the list to the name
to be deleted. To speed up the search, press on of the keys
with an alphanumeric letter (ABC,DEF,GH..) to reach the
required letter.
ROSSI MARIO
11223344
Proceed as above by means of the scroll keys and confirming all
the remaining letters (max 16). (NB: To enter a space move back
from the letter “A” to select the space (approx. 32 characters
before).
When the name is complete, press to confirm and save.
After a brief standby interval the panel returns to the base status.
For subsequent entries, repeat the above operations as descri-
bed.
To interrupt the procedure in any phase, press “R” (during letter
entries, this returns to the previous letter).
6) Press to confirm deletion. After a brief interval, the dele-
tion message is displayed and the panel returns to base sta-
tus.
NB: After point 4 in the procedure, the deleted data cannot be
retrieved. Re-enter if necessary.
NB2: Always pay attention to the deletion confirmation messa-
ges and verify correct deletion (scrolling through the list to
check).
DELETING ALL NAMES VIA THE KEYPAD:
1) Enter user programming mode by pressing keys +
simultaneously, to display the message “--------“ requesting
the user password previously memorised (default=222) and
then press key .
2) At this point the message is displayed (as described above)
requesting entry of the new number:
New Number?
4) Pressing the push-button, the message:
5) Press to confirm deletion. After a brief interval, the deletion
message is displayed and the panel returns to base status.
NOTE: Always pay special attention to pay attention to the
messages for cancellation confirmation.
appears.
Canc. All.
???
3) Press the push-button to enter the name cancellation
mode.
To Next Page
Loading...
