Need help?Do you have a question about the EM Phaser ECP26xT4 and is the answer not in the manual?
Lists key technical features of the ECP-XT4 mid/woofer drivers.
Details the technical design features of the ECP-XT4 tweeters.
Outlines the technical features of the ECP25XT4 crossover units.
Lists all components included in the speaker system package for verification.
Provides guidance on choosing optimal mounting locations for component systems.
Instructions for mounting tweeters on a flat surface using baseplates and screws.
Details on flush mounting tweeters using adapter cups and fasteners.
Guidance on removing factory speakers and mounting new mid/woofers securely.
Recommendations for locating and installing crossovers inside the vehicle.
Explains how to adjust tweeter output levels using jumpers on the crossover board.
Final checks for tweeter connection polarity and system break-in.
Detailed technical specs for ECP25XT4 and ECP26XT4 component systems.
Provides essential mounting dimensions for mid-woofers and tweeters.
General| Frequency Response | 60Hz - 20kHz |
|---|---|
| Sensitivity | 90dB |
| UV Resistance | Yes |
| Size | 6.5 inches |
| Impedance | 4 Ohm |
To Next Page
