EM TEST UCS 500Mx User Manual

EM TEST UCS 500 Series
Operating Manual V 3.05 4 / 57
1. Model Overview
1.1. UCS Models
Standard models
Model Pulse voltage CDN
UCS 500 4kV 250V 16A einphasig upgrade version
UCS 500 M4 4kV 250V 16A single phase
UCS 500 M6 6kV 250V 16A single phase
UCS 500 M6A 6kV 250V 16A single phase
Special models
Special models have the index UCS500Mx Sx. The difference to the standard models are the voltage and current
ranges. The operation is the same as by the standard UCS equipment’s.
Model Pulse voltage CDN
UCS 500 M4 S1 4kV 250V 32A single phase
2. Standards covered by UCS 500 M4 / M6 / M6A
A fully equipped UCS 500M covers the following standards
- IEC 61000-4-2 ESD
- IEC 61000-4-4 Burst
- IEC 61000-4-5 Surge
- IEC 61000-4-8 50/60Hz magnetic field
- IEC 61000-4-9 Pulse magnetic field
- IEC 61000-4-11 Voltage dips
Voltage interruptions
Voltage variations for ac power mains supply
- IEC 61000-4-12 Ringwave
- IEC 61000-4-29 Voltage interruptions
Voltage dips for dc power supply systems
- ANSI
Surge with 2ΩΩ couplings ( M6A only )

EM TEST UCS 500Mx Specifications

General

Brand	EM TEST
Model	UCS 500Mx
Category	Switch
Language	English