²²
EM TRIAL–USER MANUAL
14
2. BATTERY PACK
2.1. CHARGING OF THE BATTERY PACK
/ ! \ If you use a 15a charger you have to follow the suitable procedure.
- The phenomenon of Sparking is normal when it connects to battery because of high
current.
- This charger is designed for charging LITHIUM POLYMER type batteries only.
- Avoid charging the wrong type of battery
- The battery may be damaged if LED2 cannot be changed to green after a long time of
charging
- Always place the charger in well-ventilated and dry environments
- The charger is designed with aluminum case as its heat sink. Do not cover it to avoid the
case from being over heated while charging
- Please attention to DC terminal:
o BROWN (+) Positive terminal, Blue (-) Negative terminal
- DO NOT disassemble charger. Take it to a qualified service person when service or repair is
required.