²²
EM TRIAL–USER MANUAL
44
4.2.2. SECONDARY TRANSMISSION
The secondary transmission needs to be cleaned and lubricated after every riding session
CHAIN TENSION:
Please follow the next procedure to check or adjust the secondary chain tension.
Attention: To do this operation, the motorcycle needs to be on the floor.
1) LOOSEN the rear wheel axle.
2) ADJUST the chain tension with the setting cranks on each side of the swingarm. The crank
position needs to be the same on the 2 sides.
3) ADJUST the tension following the next picture.
4) When the tension of the rear wheel is OK, TIGHTEN the rear wheel axle.
CHAIN LUBRIFICATION:
Electric Motion recommend MOTUL for the maintenance of your bike
Clean the chain with MOTUL’s products and a cloth
Afeter cleaning, use MOTUL lubrifiant
To Next Page
Loading...