www.emachines.com
23
All connections are made correctly and the speaker bar is on, but there is still no sound.
• Your headphone/speaker jack may have been muted using Windows sound controls. To
check your headphone/speaker mute settings, click the speaker icon in the Windows taskbar,
or click (Start), Control Panel, Sounds and Audio Devices, the Volume tab, then click
Advanced. For optimum volume control using the speaker bar, we recommend that you
set the Windows volume mid-way between the lowest and highest setting.
You want to know which headphone jack on the speaker bar to use.
• You can use either jack or both jacks at the same time.
The sound coming from the speakers sounds distorted.
• Turn down the volume until the distortion disappears.
• Check the audio output volume of the sound device the speaker bar is connected to. If the
audio device’s output volume is set too high, the speaker bar’s sound may always be
distorted. To adjust the audio device’s output volume, see the device’s user guide. To adjust
the volume in WindowsXP, click the speaker icon in the Windows taskbar. For optimum
volume control using the speaker bar, we recommend that you set the Windows volume
mid-way between the lowest and highest setting.
You plugged your microphone into the speaker bar’s microphone jack, but your computer
still cannot record any sound.
• Make sure that the speaker bar’s pink microphone plug is connected to the microphone jack
on your computer.
• Your microphone jack may have been muted using Windows sound controls. To check your
microphone’s mute settings, click the speaker icon in the Windows taskbar.
To Next Page
Loading...
Need help?
General
