eMACROS HS-002 - Page 8

a unique tone based upon the sensor’s setting.
g. When detecting movements, a sensor eye will
flash red only when assigned to lines 1 and 2, not
lines 3 or 4.
ST Waterproof Plug
CH 1-4 Switch:
Select a different channel for
each outside sensor.
Charge Port
High / Low / Off Switch:
Set detection range to
High (30 ft),
Low (20 ft),
or turn sensor Off.
h. Low battery prompt:
1. When a sensor battery is low, the base station
will say "Channe#1/2/3/4 power low, please charge"
and the corresponding sensor Zone/Line LED
indicator will flash.
2. When the Base Station battery is low the red
power LED indicator will flash.
7