eMACROS HS-002 - Page 9

PIR Motion Sensor Installation
a. Mount the waterproof PIR Motion Sensor
vertically on a solid surface 3-5 feet (1-1.5m)
above the ground (rotate sensor to access
screw holes). The sensor should be able
to swivel as needed. Position the sensor
to avoid direct sunlight shining on the
sensor eye while simultaneously keeping
the solar cell facing upward.
Please mount the motion sensor Please point the sensor in an envioronment
3 to 4ft above the ground. free from limbs, falling leaves, or other items
affected by wind which may trigger a false alarm.