6.4.4 REPLACING A FUSE
The general and power circuits of the
electrical system are protected by a 6.3 A
delayed fuse (1).
When the fuse blows, the machine stops
and all the lights on the dashboard go out.
A blown fuse must always be replaced by one of the same
type and ampere rating, and never with one of another rating.
If you cannot find out why the fuse has blown, consult a Licensed Service Centre.
6.4.5 R
EPLACING BELTS
Replacing belts is quite a complicated process of dismantling and subsequent
adjustment and must only be carried out by a Licensed Service Centre.
Replace the belts as soon as they show obvious signs of
wear! ALWAYS USE GENUINE REPLACEMENT BELTS!
NOTE
IMPORTANT
EN 47MAINTENANCE
To Next Page
Loading...
General