2. IDENTIFICATION OF THE MACHINE AND COMPONENTS
2.1 IDENTIFICATION OF THE MACHINE
The plate located near the battery hou-
sing has the essential data of each
machine.
The serial number (7) must be quoted
when you require technical assistance or
spare parts.
1. Acoustic power level accor-
ding to directive 2000/14/CE
2. Conformity mark according to
directive 98/37/EEC
3. Year of manufacture
4. Nominal power (if indicated)
5. Operating engine speed
in r.p.m
6. Type of machine
7. Serial number
8. Weight in kg
9. Name and address of
Manufacturer
2.2 IDENTIFICATION OF MAIN COMPONENTS
Various main components can be seen on the machine, and these have the fol-
lowing functions:
11. Cutting deck: this is the guard enclosing the rotating blades. There can be
EN 7IDENTIFICATION OF THE MACHINE AND COMPONENTS
Note your machine serial number here
✍
3 4 7 1
69 5 8 2
To Next Page
Loading...