EN 39MAINTENANCE
6.2.2 GUIDE TO SCHEDULED MAINTENANCE
This table is to help you maintain your machine’s safety and performance. It
shows the main maintenance and lubrication work, indicating the frequency with
which it should be carried out. To the right of each item there is a box where you
write the date or after how many hours of operation the work was carried out.
WORK HOURS DONE
(DATE OR N°
OF HOURS)
1. MACHINE
1.1
Check of tight fixing and sharpness of blades
25
1.2 Blade replacement 100
1.3 Check the transmission belt 25
1.4 Transmission belt replacement
2)
–
1.5 Check the blade drive belt 25
1.6 Blade drive belt replacement
2)
–
1.7 Check the belt connecting blades 25
1.8 Replacement of belt connecting blades
2)
–
1.9 Check and adjustment of brake 10
1.10 Check and adjustment of drive 10
1.11
Check engagement and brake of blade
10
1.12 Check all fastenings for tight fitting 25
1.13 General lubrication
3)
25
2. ENGINE
1)
2.1 Engine oil change .....
2.2 Check and cleaning of air filter .....
2.3 Air filter replacement .....
2.4 Check fuel filter .....
2.5 Fuel filter replacement .....
2.6
Check and cleaning of spark plug points
.....
2.7 Replacement of spark plug .....
1)
See the engine manual for the full list and frequency.
2)
Replace at the first signs of wear, contacting a Licensed Service Centre.
3)
General lubrication should also be carried out whenever the machine is to be
left unused for a long period.
To Next Page
Loading...
General