User Manual
Ematic - ESB210
Attaching the Stand Getting Started
Use the Non-Skid Pad
Connecting Your Device
Connect the Soundbar and
the audio line.
You can also use the non-skid pad to
install this unit on a shelf or TV Stand
Disconnect
Press the button downwards
to disconnect the stand from
the unit.
Be sure to put the bigger part
of the pad towards the front
panel of the unit.
Connect
Slide the supplied stand onto
the bottom of the main unit
until you hear a click.
Powering On
Make sure that the Soundbar is
plugged into a power source.
Push the on/off button on the
Soundbar or on the remote.
The Display Screen will light up
when powered on.
To Next Page
Need help?
General
