User’s Manual
Storage & Precautions
Pairing with Your Device
Playing Media
Playback Controls
ChargingSpeaker Basics
Rugged Life Speaker
RIPPLE
• Store the speaker in a dry, ventilated
place away from children.
• Always make sure the speaker is powered
off before storing.
• Avoid storing the speaker in extreme
temperatures that may affect battery life
and speaker performance.
1. Turn on the speaker to enter Bluetooth mode.
2. The speaker will search for your device and
say “Waiting to connect to Bluetooth device”.
The indicator light will rapidly flash blue to
indicate the speaker is ready to pair.
3. Turn on Bluetooth on your device. Search for
the device “Ematic Ripple” and tap to connect.
The speaker will say “Connected” and the light
will slowly flash blue after the device is
connected.
The speaker should be connected to your
device through Bluetooth. When playing
music, the music will be automatically
transferred to the speaker.
4. You may have to enter a password on some
devices with an older version of Bluetooth.
Enter “0000” as the password and confirm it.
Connect the speaker with the USB cable to a
computer or charging port. The power button
will glow red while charging, and will turn off
when charging is complete.
Microphone
Power On / Off
Volume Up / Next
Answer Call / End Call
Play / Pause
MicroUSB Port
Volume Down / Back
Press to turn down the volume.
Hold to go back to the previous track.
Press to play or pause.
Press to turn up the volume.
Hold to go to the next track.
Entering Bluetooth mode
In Bluetooth mode
Charging Charging
To Next Page
Need help?
General
