Need help?Do you have a question about the Emax Nanohawk 1S BNF FrSky and is the answer not in the manual?
General| Type | FPV Racing Drone |
|---|---|
| Weight (Without Battery) | 20g |
| Wheelbase | 75mm |
| Motors | 0802 19000KV |
| VTX | 25mW |
| Receiver | FrSky D8 |
| Battery Connector | PH2.0 |
| Propellers | 40mm |
| Flight Controller | F4 |
| ESC | 5A |
| Camera | Emax Nano |
| Video Transmitter | 5.8GHz |
| Battery | 1S 450mAh LiPo |
Important safety guidelines and operational restrictions for using the product.
Information on where to find updates and assistance for the product.
Details on correct propeller orientation (CW/CCW) and physical installation.
Information about the integrated receiver, its compatibility, and setup.
Step-by-step instructions for pairing the Nanohawk receiver with a transmitter.
Overview of default channel map, arm switch, flight modes, and beeper configuration.
Details on the optimized PID settings for indoor and outdoor flight performance.
Information on the designed rate profile for optimal indoor flight control.
Guidance on using Betaflight Configurator to modify settings and flash firmware.
Instructions for entering DFU mode and flashing new firmware onto the flight controller.
Explanation of how the left and right sticks control the drone's movement.
Initial steps for powering on, calibrating, and preparing the Nanohawk for flight.
To Next Page
