Need help?Do you have a question about the Emax Tinyhawk III Plus Freestyle and is the answer not in the manual?
General| Wheelbase | 120mm |
|---|---|
| Flight Time | 4-6 minutes |
| Flight Controller | F4 |
| Receiver | FrSky |
| VTX | 25-200mW |
| Video Transmitter | 25-200mW |
User agreement, age suitability, and supervision requirements.
Assembly, safe flying practices, environmental conditions, and modification warnings.
Details drone specs: wheelbase, motor, main control board, camera, image transmission, battery.
Details transmitter specs: weight, channels, power output, battery, charging system, and interfaces.
Details goggles specs: weight, screen size, screen resolution, and operating frequency.
Details drone specs: wheelbase, motor, camera, image transmission, battery for analog version.
Details goggles specs: weight, screen size, screen resolution, and operating frequency.
Lists all components included in the Tinyhawk III Plus Freestyle RTF HD package.
Lists all components included in the Tinyhawk III Plus Freestyle RTF Analog package.
Diagram labeling ports and listing key transmitter features like weight and dimensions.
Step-by-step guide for binding and unbinding the E8 Transmitter to the flight controller.
Procedure to recalibrate the transmitter joysticks to address potential issues.
Details on battery compatibility, correct installation, and charging indicator lights.
Steps to perform a firmware update on the E8 Transmitter using the EMAX Serial Update Tool.
Diagram illustrating and labeling the various external parts of the Transporter II HD goggles.
Details on weight, dimensions, screen size, resolution, operating frequency, and antenna.
Description of how to use the Up/Menu, Down, Confirm, and Power buttons on the goggles.
Steps for performing a standard firmware update on the Transporter II HD goggles.
Specifications for analog goggles: dimensions, weight, screen, battery, and charging.
Guide to manually selecting frequency bands and channels for video reception.
Diagram identifying key components of the Tinyhawk III Plus Freestyle drone.
Explanation of HD Digital and 32-bit Analog video transmission systems.
Steps to configure frequency, channel, and power using Betaflight Configurator software.
Process for binding the Tinyhawk III Plus Freestyle receiver with the E8 Transmitter.
Methods to change the flight controller's binding key using Betaflight Configurator.
Key specifications of the 4-in-1 8-bit 6A Electronic Speed Controller.
How to modify programming settings and channel mapping using Betaflight Configurator.
Configuring AUX switches for Arm, Flight Mode, Flip Over After Crash, and Beeper functions.
Steps to flash flight controller firmware by entering DFU mode and using the update tool.
Procedure to restore default flight controller settings using a CLI Dump file.
Essential steps before flying: powering on, calibration, and battery voltage checks.
Procedure to set the Tinyhawk III Plus Freestyle into a flight-ready state.
Guidance on flying the drone using FPV goggles, including throttle control and battery monitoring.
To Next Page
