Tinyhawk III Plus Freestyle
Unlocking refers to setting the Tinyhawk III Plus Freestyle into a flight-ready
state. When the Tinyhawk III Plus Freestyle is first powered on, the propellers
won't spin until it's unlocked.
1.Move the throttle to the bottom position to control the aircraft. Wait for
the red light on the flight controller to stop blinking and the blue light to stay
solid, indicating that the aircraft calibration is complete and it's ready.
2.Then, move the left switch on the E8 Transmitter (ELRS-2.4G) to the third
position upward to unlock.
3.When the Tinyhawk III Plus Freestyle is successfully unlocked, you will see
the propellers start spinning.
Note: When a collision occurs with the Tinyhawk III Plus Freestyle, stop
flying immediately. Failing to halt the flight promptly could result in damage to
the Tinyhawk III Plus Freestyle. Before handling the Tinyhawk III Plus Freestyle,
make sure to move the switches to the locked position.
To Next Page
Loading...
