Emax TinyHawk Freestyle User Manual

Thanks for purchasing the Tinyhawk Freestyle . Designed in California, assembled in
China.

Emax TinyHawk Freestyle Specifications

General

Flight Controller	F4 (MATEKF411RX Firmware)
Wheelbase	115 mm
Battery Connector	JST-PH2.0
Motors	1103 7000KV Brushless
ESC	4-in-1 5A ESC
Propellers	Avan Rush 2.5 Inch
Battery	2S 450mAh LiPo
VTX	25mW/100mW Switchable
Receiver	FrSky D8 Compatible
Flight Time	4 minutes

Summary

Safety Precautions and Guidelines

Propeller Installation Guide

VTX Configuration with Button

Navigating VTX Channels

VTX Settings via Betaflight OSD

Flight Controller System Overview

Onboard Receiver and Binding Procedure

Software Settings and Firmware Updates

PID Tuning and Software Adjustments

Tuning PID profiles and making software adjustments using Betaflight Configurator.

Flight Controller Firmware Reprogramming

Steps for flashing new firmware onto the Tinyhawk Freestyle flight controller.

Applying Settings with CLI Dump File

Drone Flight Controls

Radio Stick Control Mapping

Tinyhawk Freestyle Flight Operations

Pre-Flight Preparation and Arming

Procedure for powering on, calibration, and arming the drone before flight.

Line of Sight and FPV Flying

Guidance for practicing Line of Sight (LoS) and First Person View (FPV) flying.

Flight Tips and Battery Monitoring

Age Restriction Warning