Need help?Do you have a question about the Emax Tinyhawk III Plus and is the answer not in the manual?
Lists the components included in the Tinyhawk III Plus RTF HD kit.
Lists the components included in the Tinyhawk III Plus RTF Analog kit.
Details the physical layout and components of the E8 Transmitter.
Covers initial setup and basic operational aspects of the transmitter.
Explains the process of binding the transmitter to the flight controller.
Describes the purpose and operation of each button on the transmitter.
Details how to use trim buttons for fine-tuning aircraft control.
Guides users through calibrating the transmitter's joysticks for accurate input.
Explains how to switch the transmitter's control layout for different hand preferences.
Describes how to connect the transmitter to a simulator using the trainer port.
Provides instructions on charging the E8 Transmitter's battery.
Step-by-step guide for updating the transmitter's firmware using the serial tool.
Instructions for adjusting transmission power and telemetry rates.
Explains how to change the binding key for the transmitter.
Introduces the Transporter II HD goggles and their features.
Lists the detailed technical specifications of the Transporter II HD goggles.
Details how to use the buttons for controlling the goggles' functions and menus.
Describes the various settings available within the goggles' system menu.
Explains how to use the DVR function for recording video.
Guides on formatting and using TF cards for the DVR.
Step-by-step instructions for performing a regular firmware update on the goggles.
Instructions for updating firmware when the goggles are in boot mode.
Introduces the Transporter II goggles and their overall design.
Lists the detailed technical specifications of the Transporter II goggles.
Explains how to select and search for video channels.
Covers starting, stopping, and configuring video recording.
Details screen adjustment options and battery management for the goggles.
Instructions for installing and removing propellers on the drone.
Describes the different camera versions available for the drone.
Explains HD digital and analog video transmission systems.
Guides on changing video transmission parameters.
Details how to configure the On-Screen Display (OSD) settings.
Describes the integrated AIO board and the ELRS receiver.
Covers binding the drone and configuring the binding key.
Provides information on the ESC and Flight Controller specifications.
Explains how to adjust PID settings for flight performance.
Guides on adjusting channel mapping and flight modes using Betaflight.
Instructions for updating the flight controller firmware.
Explains how to restore default settings by flashing a CLI dump file.
Details the steps required to unlock the drone for flight.
Explains the different flight modes and how to switch between them.
Guidance for learning basic flight maneuvers and hovering.
Tips for flying using First-Person View (FPV) goggles.
To Next Page
General