Tinyhawk III Plus
TYPE-C Charging Port: DC/5V charging (Recommended: 5V 3A charging in
powered-on state, 5V 1A charging in powered-off state). Can be connected to
an external power source with 5V 3A (Insufficient current may cause inadequate
power supply).
Warning: Do not use an external power source or power adapter with a voltage
higher than 5V, as it may result in damage to the product.
Firmware Update Connection Port: (For updating firmware of VTX, camera, etc.)
Boot Switch: (Note: Keep the switch on the left during normal use.)
TF (microSD) Card Slot: Recommended for use with 8-32GB TF cards (Class 10
high-speed TF cards).
Antenna Connection Port: SMA-KY (external thread, internal hole).
Charging Indicator Light: (Charging status - red light is solid; Full charge status
- green light is solid).
Recording Indicator Light: (Powered-on status - green light is solid; Recording
status - green light flashes; During firmware update - green light is solid).
Firmware Update Indicator Light: (During firmware update - green light is
solid; During Boot update - green light is solid).
Please refer to the manufacturer's user manual for detailed instructions on using
the Transporter II HD goggles and its various functions.
2.3.2 System Settings Menu
Scan: Displays the current channel (R1-R8, F2, F4 - a total of 10 channels).
Playback: Accesses the video playback function (displays video count
and available TF card capacity).
Format SD-Card: Formats the TF (microSD) card.
Record Mode: Sets the recording mode (Automatic/Manual).
Record Format: Chooses the recording format (MOV/TS format).
Record OSD: Specifies whether to keep the on-screen display (OSD)
during recording (Yes/No).
Auto Scan: Enables or disables the auto-scan feature.
About: Displays version information and manufacturer details.
To Next Page
Loading...
Need help?
General
