Emax Tinyhawk III Plus - Flight Controller Parameter Management; Tinyhawk III Plus Parameter Flashing

emax-usa.com
Tinyhawk III Plus
43
5.8 Flashing Flight Controller Parameters
Download the latest CLI Dump file from https://emax-usa.com/. Open the CLI
Dump file in a text editor, copy all the text, paste the settings into the command
bar, and press Enter. Once completed, reconnect to the Betaflight Configurator,
and the Tinyhawk III Plus will be restored to default
settings.
Disclaimer:
The Tinyhawk III Plus has been optimized to its best state. Changing
PID settings may affect flight time, overall speed, aircraft control, and motor
overheating. We do not recommend altering any PID settings or upgrading
firmware to new versions for the Tinyhawk III Plus.