Emax Tinyhawk III Plus - Advanced Configuration and Firmware; Tinyhawk III Plus Channel Settings

emax-usa.com
Tinyhawk III Plus
40
5.6 Adjusting channel settings through the Betaflight
Configurator software
The Betaflight Configurator can be used to change the programming
settings of Tinyhawk III Plus. The Betaflight configurator and flight controller
firmware can be found in the https://github.com/betaflight/ Obtain.The
Tinyhawk III Plus is factory configured as a channel diagram for
TAER1234.
Taking the E8 Transmitter (ELRS-2.4G) as an example:
AUX 1 is a three-level switch, which is an unlock switch (ARM);
AUX 2 is a three-level switch, which is used for flight modes such as Acro
(manual), Horizon (semi self stable), and Angle
(selfstable);