Emax Tinyhawk III Plus User Manual

emax-usa.com
Tinyhawk III Plus
32
4.4 Tinyhawk III Plus Video Transmission
The Tinyhawk III Plus offers two versions of video transmission:
(1) HD Digital Video Transmission The HD digital video transmission version uses
the HDZero Whoop Lite system and is paired with the HD camera version.
(2) 32-bit Open Source Analog Video Transmission The 32-bit open-source
analog video transmission version is paired with the analog camera version.
4.4.1 HD Digital Video Transmission (HDZero Whoop Lite)
The HD digital video transmission is facilitated by the HDZero Whoop Lite
system.
For more detailed instructions on using the HDZero Whoop Lite system, refer to
its instruction manual.
4.4.2 EMAX 32-bit Analog Video Transmission
The specifications of the 32-bit analog video transmission are as follows:
 Frequency: 5.8GHz, 40 channels
 RF Power: 0mW / 25mW / 100mW / 400mW
 Power Input: 5V
 Other: Supports Smartaudio protocol, can update VTX firmware via the
flight controller.
4.5 Changing Video Transmission Settings
The default video transmission settings for the Tinyhawk III Plus are R:4:25mW. If
you wish to change these settings, follow these steps:
1. Open the Betaflight Configurator software.
2. Navigate to the video transmission settings.

Emax Tinyhawk III Plus Specifications

General

Brand	Emax
Model	Tinyhawk III Plus
Category	Drones
Language	English