Emax Tinyhawk III Plus - Transmitter Power and Telemetry Settings

emax-usa.com
Tinyhawk III Plus
13
 Disconnect and reconnect the Type-C data cable.
1.4.2 Power Switching and Changing
Telemetry/Transmission Rate
To switch power levels or modify telemetry/transmission rates, follow these
steps:
1. Follow steps (1) from the Firmware Update and Upgrade section.
2. Follow steps (2) from the Firmware Update and Upgrade section.
3. In the parameter configuration section of the upgrade tool, click on
"Read Parameters." This will display all the current settings of the
transmitter.
Locate the options for transmission rate, telemetry rate, and power within
the displayed parameters. Click on the corresponding dialog box for each
option. Choose the appropriate parameters that you want to set.
4. After selecting the desired parameters, click on "Write Parameters." Once
the writing process is complete, you will see a confirmation indicating the
successful modification of the parameters.
5. Power off the transmitter and then power it on again to apply the
changes.