Tinyhawk III Plus Freestyle
5.Tinyhawk III Plus Freestyle- AIO
5.1Tinyhawk III Plus Freestyle-AIO
The Tinyhawk III Plus Freestyle's receiver is an onboard ELRS (2.4G) receiver.
The RF module used is SX1280, employing SPI communication. It features a
ceramic antenna (with a gain of 3dB) and operates within the frequency range of
2400-2480MHz. The receiver protocol used is CRSF, and its protocol version is
ELRS V3.0.
5.2.2 Binding the Tinyhawk III Plus Freestyle with the E8 Transmitter (ELRS-
2.4G)
Binding, or pairing, is the process of connecting the receiver and transmitter.
One receiver can be bound to only one transmitter, while one transmitter can be
bound to multiple receivers.
The Tinyhawk III Plus Freestyle included in the RTF kit is already bound to
the E8 Transmitter (ELRS-2.4G). If needed, follow these steps to bind (assuming
you haven't changed the binding key):
To Next Page
Loading...
