Emax Tinyhawk III Plus Freestyle - Betaflight AUX Switch Configuration

emax-usa.com
Tinyhawk III Plus Freestyle
36
Taking the E8 Transmitter (ELRS-2.4G) as an example:
AUX 1 is a 3-position switch and serves as the Arm switch.
AUX 2 is a 3-position switch and functions as the flight mode switch, with
positions for Acro (Manual), Horizon (Semi-stabilized), and Angle (Stabilized)
modes.
AUX 3 is a 2-position switch and is configured as the Flip Over After Crash
mode.
AUX 4 is a 2-position switch and is configured as the Beeper. Follow the
above instructions to configure your E8 Transmitter (ELRS-2.4G) or make these
changes in the Betaflight Configurator.