Tinyhawk III Plus Freestyle
6.Flying the Tinyhawk III Plus Freestyle
Before flying upon startup, please ensure you've familiarized yourself with
flight controls. Fly cautiously and operate in open and controlled areas.
Start by powering on the remote control and video goggles, ensuring the
goggles are on the correct video channel. Turn on the Tinyhawk III Plus Freestyle
by sliding the battery into the battery tray and connecting the power. Once the
battery is in place, set the Tinyhawk III Plus Freestyle on a level, stable surface to
allow for calibration.
Calibration takes a few seconds, and after that, the Tinyhawk III Plus
Freestyle is ready to fly. With a fully charged battery, it can fly for about 4
minutes. When the battery voltage drops to 3.2V, land the Tinyhawk III Plus
Freestyle promptly. Continuing to fly beyond this point can severely damage
your battery, an action that EMAX does not recommend.
To Next Page
Loading...
