Emax Transporter User Manual (English)

To Next Page

Tinyhawk

Goggles

Battery and Charging

The battery cartridge comes preinstalled with a 18650 battery. If a battery reinstall is

required please use caution making sure to install with the correct polarity. The

battery can be charged in the cartridge with a micro USB cable. When the battery is

emax-usa.com

charging the indicator light is green. The indicator light will turn red when charging is

complete.

Assembly

Minimal assembly is required for proper operation of the goggles. Follow the steps

below.

1. Attach the two supplied antennas by screwing them on to the SMA

connection point.

2. Place the battery cartridge in the sleeve on the backside of the head strap.

3. Feed the power lead through the loop on the top side of the head strap and

plug in the power lead to the port on the goggles. This will power the goggles.

4. Please remove antennas and power lead when traveling/storing the goggles.

Need help?

Do you have a question about the Emax Transporter and is the answer not in the manual?

Emax Transporter Specifications

General

Minimal assembly required. Steps include attaching antennas, placing battery, connecting power lead, and storing.

Power on by connecting the battery lead; power off by disconnecting it.

Manually select channel and frequency band using CH and FR buttons. Table maps frequencies.

Scan function aids in finding the correct channel for best video reception.

Adjust brightness, contrast, saturation, and language using menu button and FR/CH buttons.