Embraer EMB-505 Phenom User Manual

HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
EMB-505
GROUND HANDLING
AND
SERVICING HANDBOOK
GHSH-3261
20 NOVEMBER 2009
REVISION 3 - 24 FEBRUARY 2011
Copyright © 2011 by EMBRAER S.A. All rights reserved. The information, technical data, designs and drawings
in this document are proprietary information of Embraer or third parties and shall not be used or disclosed to
any third party nor copied or reproduced, whether in whole or in part, in any form or by any means whatsoever
without the express written authorization of Embraer.
TM
ÀREA DE NÃO INTERFERÊNCIA

Embraer EMB-505 Phenom Specifications

General

Manufacturer	Embraer
Model	EMB-505 Phenom 300
First Flight	2008
Crew	2
Length	15.9 m (52 ft 2 in)
Wingspan	16.2 m (53 ft 2 in)
Range	3, 650 km (2, 270 mi, 1, 970 nmi)
Service Ceiling	13, 716 m (45, 000 ft)
Max Takeoff Weight	17, 968 lb
Powerplant	2 × Pratt & Whitney Canada PW535E turbofan
Thrust per Engine	3, 200 lbf
Maximum Speed	453 kn

Summary

Introduction to the Phenom 300 Ground Handling and Servicing Handbook

GHSH Introduction and Manual Structure

Purpose, scope, and organizational overview of the GHSH.

Manual Revision and Update Information

Details on how revisions are indicated and applied to the manual.

Aircraft Zones and Component Identification

Identification and illustration of aircraft zones and relevant components.

Ground Handling and Servicing Procedures

Towing and Taxing Procedures

Procedures for towing and taxing the aircraft, including towbar usage.

Parking, Mooring, and Storage Procedures

Guidance on parking, mooring, storing, and returning the aircraft to service.

Fuel System Maintenance and Servicing

Detailed procedures for refueling, defueling, draining, and checking fuel systems.

Aircraft Water Tank Servicing

Procedure for servicing the aircraft's water tank.

Aircraft Waste Tank Servicing

Procedure for servicing the aircraft's waste tank.

Aircraft Maintenance Safety Procedures

Standard safety procedures for aircraft maintenance operations.

Static Grounding Standard Practices

Mandatory procedures for static grounding during maintenance and servicing.

Main Battery Removal Procedure

Step-by-step instructions for removing the aircraft's main batteries.

Main Battery Disconnection Procedure

Instructions for disconnecting the main batteries from the electrical bus.

Main Battery Installation Procedure

Step-by-step instructions for installing the aircraft's main batteries.

Main Battery Connection Procedure

Instructions for connecting the main batteries to the electrical bus.

Aircraft Energization with External DC Power

Procedure for supplying electrical power to the aircraft using an external DC supply.

Aircraft De-energization Procedure

Procedure for removing electrical power from the aircraft using external DC supply.

Trim Actuator Controller Operational Test

Performing operational checks of the roll and yaw trim systems.

Fuel System General Maintenance and Servicing

General procedures and warnings for fuel system maintenance and servicing.

Main Hydraulic System Depressurization

Procedure to release pressure from the main hydraulic system.

Hydraulic System Pressurization with HTS

Procedure to pressurize the hydraulic system using a hydraulic test stand.

Landing Gear Safety Pin Standard Practices

Guidelines for installing and using landing gear safety pins.

NLG and MLG Tire Visual Inspection

Procedure for visually inspecting nose and main landing gear tires for wear and damage.

Engine Start and Dry Motoring Procedures

Instructions for performing engine dry motoring and start procedures.

Appendices

Ground Support Equipment (GSE) Appendix

Details on specific ground support equipment (GSE) used for aircraft maintenance.

Consumable Products Appendix

Catalog of approved consumable products with specifications and storage codes.