AIRPLANE
OPERATIONS
MANUAL
NAVIGATION AND
COMMUNICATION
REVISION 39
2-18-75
Page
17
Code
01
AOM-145/1114
EM145AOM182050A.DGN
3
2
1
COMBINER CONTROLS AND SENSORS
FAULTS AND ANNUNCIATIONS
Failure Flags are displayed for invalid sensor statuses and
miscompares between certain similar parameters. These are generally
indicated by boxed annunciations for the affected parameters, and in
the case of a failure, the removal of all symbols related to the fault.
Flags are provided for the following failures, miscompares or alternate
data sources:
NOTE: For dual IRS system configuration, the AHRS2 references
below would be replaced by IRS2.
To Next Page
