Add vCenter client in Avamar Administrator
29
Configuration and Setup
5. For Client Type, select VMware vCenter.
6. Complete the following settings:
7. Click OK.
The New Client dialog box closes.
Table 4 New vCenter client settings
Setting Description
New Client Name or IP Fully-qualified DNS name, or IP address of the vCenter.
Port vCenter web services listener port. Default setting is port 443.
User Name vCenter user account name you previously created.
Password Password for the vCenter user account you previously created.
Verify Password Type the password again.
Contact Optional contact name.
Phone Optional contact telephone number.
Email Optional contact email address.
Location Optional contact location.
To Next Page
Loading...