January 2006 350 Series Electrohydraulic Actuators
Fisher is a mark owned by Fisher Controls International LLC, a member of the Emerson Process Management business division of Emerson
Electric Co. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are
not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability.
We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Fisher does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and
maintenance of any Fisher product remains solely with the purchaser and end-user.
Emerson Process Management
Fisher
Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 128461
www.Fisher.com
Fisher Controls International LLC 2004; All Rights Reserved Printed in USA
350 Series Electrohydraulic Actuators
(Obsolete Product)
Obsolete products may not be manufactured again in
any Fisher location under any conditions.
Recommended spare parts availability is guaranteed for
10 years after the last production on manufactured trim
replacement parts and 5 years of best effort on die cast
parts, elastomers, buyout
components, and electronic components. Post-
sale documents (such as instruction manuals)
will be available on CD Rom and the Fishweb.
Pre-sale documents (such as bulletins) for
obsolete are not included on the Fishweb or CD-
ROM.
To Next Page
Need help?
General
