To Next PageTo Next PageWhy won't my Emerson Vacuum Cleaner pick up dirt?
Your Emerson Vacuum Cleaner might not be picking up dirt due to several reasons. First, the filter might be clogged, so you should clean or replace it. Secondly, the hose could be clogged; remove the hose and clear any debris. Finally, check for air leaks by ensuring the power head is securely attached to the bucket and that the bucket is one of the designated types.
What to do if my Emerson Vacuum Cleaner will not run?
If your Emerson Vacuum Cleaner won't run, the issue might be a lack of electricity. Ensure the electrical outlet has voltage. If needed, contact a qualified electrician.
General| Model | BH01000 |
|---|---|
| Type | Wet/Dry Vacuum |
| Power Source | Corded Electric |
| Voltage | 120V |
| Horsepower | 1.0 HP |
| Included Accessories | Hose |
Explains the meaning of DANGER, WARNING, and CAUTION signals used in the manual.
Lists essential safety precautions for operating the Vac, including fire, shock, and injury prevention.
Lists critical warnings found directly on the Vac's motor housing for user safety.
Describes the power head's intended use with 5-gallon buckets and its capabilities as a wet/dry vacuum and blower.
Details proper grounding procedures and warnings to prevent electric shock.
Explains the use and restrictions of temporary grounding adapters for outlets.
Lists critical warnings to prevent fire, explosion, and damage during operation.
Details precautions against electric shock and injury during operation and servicing.
Step-by-step guide on how to securely attach and remove the powerhead from the bucket.
Explains how to turn the unit ON and OFF using the switch and its symbols.
Instructions for vacuuming dry debris, emphasizing proper filter use and maintenance.
Guide for vacuuming liquids, including the float mechanism and filter removal recommendations.
Details how to use the blowing function and associated safety warnings.
Emphasizes the importance of filter condition for maintaining vacuum performance.
Provides step-by-step instructions for correctly replacing the filter bag.
Warns against removing the filter cage and float to protect the motor and impeller.
Guidance on cleaning the exterior of the vacuum and proper storage procedures.
Addresses common problems like loss of suction or the unit not running, with causes and solutions.
Warns about immediate discontinuation of use if parts detach or break, exposing electrical components.
Identifies the stock number for ordering replacement filters.
Details the terms and conditions of the 90-day limited warranty for the product.
Lists conditions and types of damages not covered by the limited warranty.
Specifies the extent of Emerson Tool Company's liability regarding product use and damages.
