Emerson CLOSETMAID 10 in. Drawer User Manual

10 in. Drawer
Tiroir de 25,4 cm
Cajón de 25,4 cm
BEFORE BEGINNING | AVANT DE COMMENCER | ANTES DE EMPEZAR
INSTALLATION INSTRUCTIONS DIRECTIVES D’INSTALLATION INSTRUCCIONES DE INSTALACIÓN
What you will need:
Vous aurez besoin
de :
Va a necesitar:
© ClosetMaid Corporation 2013 | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca
• Please read all instructions carefully.
• Familiarize yourself with all parts (see
“PARTS”) and check quantities.
• Follow all safety precautions (see
“SAFETY PRECAUTIONS”).
• Prière de lire avec soin toutes les directives
fournies.
• Se familiariser avec les pièces nécessaires
à l’installation (voir « PIÈCES ») et vérifier
les quantités présentes.
• Respecter toutes les consignes de sécurité
(voir « CONSIGNES DE SÉCURITÉ »).
• Lea todas las instrucciones cuidadosamente.
• Familiarícese con todas las piezas (vea
“PIEZAS”) y verifique las cantidades.
• Siga todas las precauciones de seguridad (vea
“PRECAUCIONES DE SEGURIDAD”).
01-81618 09/13

Emerson CLOSETMAID 10 in. Drawer Specifications

General

Brand	Emerson
Model	CLOSETMAID 10 in. Drawer
Category	Indoor Furnishing
Language	English

Summary

Drawer Installation Overview and Preparation

Initial Preparation Steps

Read instructions, identify parts, and check quantities before beginning assembly.

Tools and Materials Checklist

List of necessary tools and items for the drawer installation process.

Essential Safety Precautions

Drawer Components and Hardware Identification

Identifying Drawer Components

Visual guide to identifying the main parts of the drawer assembly.

Identifying Assembly Hardware

List and identification of all screws, locks, and other hardware for assembly.

Assembly Guidance and Key Steps

Tips for Identifying Parts

Guidance on how to identify parts using visual cues and labels for accurate assembly.

Installing Cam Locks and Screws

Instructions and best practices for installing and tightening cam locks and screws.

Step-by-Step Drawer Assembly

Prepare Side Panels

Insert cam locks into the side panels as the first assembly step.

Prepare Drawer Back and Front Panels

Install cam posts and dowels into the drawer back and front panels.

Assemble Drawer Box Structure

Attach drawer sides to the back, slide in the bottom, and attach the drawer front.

Install Drawer Slides

Attach the drawer slides to the assembled drawer for smooth operation.

Attach Drawer to Base Unit

Connect the assembled drawer to the base unit, covering single and multiple drawer configurations.