Emerson ClosetMaid Stackable 12 Cube Organizer User Manual

Stackable 12 Cube Organizer
Organisateur Superposable à 12 Compartiments
Organizador Apilable de 12 Cubos
© ClosetMaid Corporation 2013 | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
• Please read all instructions carefully.
• Familiarize yourself with all parts (see
“PARTS”) and check quantities.
• Follow all safety precautions (see
“SAFETY PRECAUTIONS”).
• Prière de lire avec soin toutes les directives
fournies.
• Se familiariser avec les pièces nécessaires à
l’installation (voir « PIÈCES ») et vérifier les
quantités présentes.
• Respecter toutes les consignes de sécurité
(voir « CONSIGNES DE SÉCURITÉ »).
• Lea todas las instrucciones cuidadosamente.
• Familiarícese con todas las piezas (VEA
“PIEZAS”) y verifique las cantidades.
• Siga todas las precauciones de seguridad
(vea “PRECAUCIONES DE SEGURIDAD”).
BEFORE BEGINNING | AVANT DE COMMENCER | ANTES DE EMPEZAR
INSTALLATION INSTRUCTIONS DIRECTIVES D’INSTALLATION INSTRUCCIONES DE INSTALACIÓN
What you will need:
Vous aurez besoin de :
Va a necesitar:
01-80040 04/13

Emerson ClosetMaid Stackable 12 Cube Organizer Specifications

General

Brand	Emerson
Model	ClosetMaid Stackable 12 Cube Organizer
Category	Indoor Furnishing
Language	English

Summary

Installation Instructions Overview

Before Beginning Assembly

Read all instructions, familiarize with parts, and follow safety precautions before starting assembly.

Safety Precautions

General Safety Warnings

Covers choking hazards, unit instability, overloading, climbing, attaching items, and wall mounting risks.

Parts Identification

Component Identification

Lists and illustrates all components and hardware required for assembly, including panels and fasteners.

Helpful Assembly Hints

Part Identification Tips

Guidance on how to identify parts using stamped letters or labels on unfinished edges or laminate.

Finished vs. Unfinished Edges

Instructions on orienting finished edges correctly for proper assembly and appearance.

Hand Tighten Screws

Recommendation to hand-tighten screws and use caution with power tools to avoid overtightening.

Assembly Step 1: Initial Dividers

Assembly Step 2: Second Dividers

Assembly Step 3: Additional Dividers

Assembly Step 4: Short Dowels

Assembly Step 5: Top/Bottom Panels

Assembly Step 6: Side Panels and Covers

Assembly Step 7: Back Panels

Assembly Step 8: Wall Attachment

Assembly Step 9: Final Dowels/Plugs